When To Stain A New Cedar Fence?

How long should cedar fence dry before staining?

Remember, if you install a cedar fence it will need 5-7 weeks to dry in the sun before it will be ready for any kind of staining or treatment.

How long should you wait before staining a new fence?

A good rule of thumb is to wait a month or two if the fence is made with dry materials. This will allow it to weather enough but not too much. If the fence is made with pressure treated materials it may be 3-4 months for the posts to dry enough and can be checked with a moisture meter.

Can you stain new cedar?

We recommend you wait 3+ months to stain new smooth cedar wood surfaces to allow the wood to weather, creating an ideal porous surface that will hold the stain better.

You might be interested:  Readers ask: How Much Would A Fence Cost?

Can you stain a new fence right away?

New fences should not be stained right away. The type of wood used in your new fence will influence when, approximately, you should stain it. Wet wood won’t allow the stain to properly penetrate the wood grain and protect the wood. If the water soaks into the wood, it’s ready for stain.

Should you stain a cedar fence right away?

If you installed a cedar fence, you can usually stain or seal your fence right away without waiting. Consider the type of wood, and then wait the proper amount of time (usually anywhere between 1 and 6 months) before staining or sealing your fence. This will allow it to sufficiently weather and to dry or cure.

Should you stain cedar right away?

If you wait a year, the wood will turn gray, and may even show deterioration from the weather. Cedar should be stained as soon as it will accept the stain. By staining early, you provide UV and water protection to the wood. The natural drying process is slowed down a bit, but that helps prevent cracking.

What happens if you stain over stain?

Like any good hair stylist will tell you, you can apply a dark hair colour over a light colour, but not a light over a dark. To go from a dark shade to a lighter shade, you must strip and remove the dark shade first. When it comes to furniture and wood, staining over stain works exactly the same way!

How long should you wait before sealing a new cedar fence?

A good rule of thumb is to wait four to eight weeks after the fence has been installed before staining and sealing it. During this period of time, the moisture content of the wood will decrease.

You might be interested:  Question: How To Build A White Picket Fence?

Do you need to clean a new fence before staining?

Before applying any type of finish to a fence, including stains, you need to remove any old finish(es) and remove any built up dirt, dust, grime or other substances from the fence. Pressure washing a fence before staining it will also ensure blemishes are removed that could show through the surface of the stain.

What is a good stain for cedar?

Our Top 5 Best Stains For Cedar Wood

  • Ready Seal Natural Cedar Exterior Stain.
  • Thompson’s WaterSeal Waterproofing Stain.
  • Defy Extreme Transparent Exterior Wood Stain.
  • Olympic Stain Elite Woodland Oil Stain.
  • Cabot Semi-Solid Deck & Siding Stain.

What is the best way to stain cedar?

Staining Cedar With a Semi-Transparent Stain Manual brushing is often the best option since spraying can result in blotching. Semi-transparent stain also beads up water, preventing moisture from penetrating the wood’s cellular structure.

What is a good finish for cedar?

Cedar accepts most finishes well, including penetrating oils, such as tung oil and linseed oil. Penetrating oils are especially effective for sealing the grain while leaving the wood looking raw and natural.

How long should you wait before staining a new redwood fence?

Allow the fence to dry thoroughly prior to staining. 24 hours is generally recommended.

Is it better to stain or seal a fence?

Applying a stain is a bit trickier than sealers, and is best left to professionals. Although a wood stain is more expensive than a sealer, it can last up to 5 times longer and looks more professional. So you certainly get your money’s worth.

You might be interested:  Question: How To Draw A Chain Link Fence?

How much should it cost to stain a fence?

The price of having a professional paint or stain your fence averages $2,000. Homeowners could pay anywhere between $750 to $4,250 depending on the condition, height and length of the fence. Costs average $3 to $17 per linear foot or $1 to $2.50 per square foot.

Leave a Reply

Your email address will not be published. Required fields are marked *