- 1 What is the best way to set fence posts in concrete?
- 2 Should fence posts be set in concrete?
- 3 Can you set fence posts with dry concrete?
- 4 How deep should a concrete fence post be in the ground?
- 5 Will wooden posts rot in concrete?
- 6 How do you keep fence posts from rotting in concrete?
- 7 Is 2 feet deep enough for fence posts?
- 8 How long will wooden posts last in concrete?
- 9 How long will a treated 4×4 post last in the ground?
- 10 How do I keep my post level while concrete dries?
- 11 How much concrete does it take to fill a post hole?
- 12 How long does a pressure treated post last in the ground?
- 13 How long do fence posts last in concrete?
- 14 How many bags of Postcrete do you need per post?
What is the best way to set fence posts in concrete?
Set the post into the hole and attach 2×4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.
Should fence posts be set in concrete?
Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
Can you set fence posts with dry concrete?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
How deep should a concrete fence post be in the ground?
As a rough guide the hole should be a minimum 1/3 the height of the fence, so a 6 foot fence would need an 8 foot post in a 2 foot deep hole. Similarly, the hole should be three times the diameter of the post.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.
How do you keep fence posts from rotting in concrete?
Fill the first three inches up with gravel so the end of the post doesn’t come into contact with the dirt. Gravel allows water to drain quickly away from the post and into the soil. Be sure to place the post in the center of the hole. Finally, fill the entire hole up with cement to the top.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How long will wooden posts last in concrete?
A pressure treated post will last around 10 years. if you use metposts the post will still rot they just make it easier to replace & in my opinion they look horrible. In my experience metposts are less secure than concrete too.
How long will a treated 4×4 post last in the ground?
A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.
How do I keep my post level while concrete dries?
You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
How much concrete does it take to fill a post hole?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How long does a pressure treated post last in the ground?
5 Answers. A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone. I suggest you embed the post in concrete, trowel a peak around the post so water runs off, and don’t let the PT post come in contact with the ground.
How long do fence posts last in concrete?
Concrete is as sturdy and durable a building material as you’ll find. With just a minimal level of maintenance, concrete fence posts can last for around 25 years. However, they are not immune to wear and tear. Over time, wind and rain can cause concrete posts to chip and crack.
How many bags of Postcrete do you need per post?
You’ll need to bury the posts at least 2ft In the ground. As for how many bags of postcrete you need per post, that’s purely dependant on how big you make the post holes. As a rule of thumb, when using standard post hole diggers, I average 1 bag per post. For larger holes I would allow 1.5 bags to 2 bags per hole.