- 1 Where do you start when putting up a fence?
- 2 How far apart do you set fence posts?
- 3 Where do you start the fence on the side of a house?
- 4 What is the easiest fence to install?
- 5 Is 2 feet deep enough for fence posts?
- 6 How many bags of cement do I need for a fence post?
- 7 Should you use concrete for fence posts?
- 8 Can fence posts be 10 feet apart?
- 9 Should a fence be level or follow the ground?
Where do you start when putting up a fence?
- Dig your fence post holes to be three times the width of your fence post and two feet into the ground.
- Insert your corner or end post first.
- Pour in your concrete mix and add water.
- Hold the post in place for a few minutes so that it starts to set.
- Move on to the next fence post.
How far apart do you set fence posts?
How far apart should fence posts be? In general, T-posts are spaced between 8-12 feet apart, depending on what you’re trying to contain or keep out. Closer spacing is suggested for large livestock, like cattle, while wider spacing is fine for fending off deer and other large pests.
Where do you start the fence on the side of a house?
Start the fence as close to the front of the house as possible to provide a long dog run. Push the fence forward or backward enough to park a trailer in or out of the fence. Balance the fence placement on both sides of the house. Line your fence up with the neighbor’s fence.
What is the easiest fence to install?
Aluminum fences are often considered the easiest to install—you simply have to assemble the sections of rails rather than, say, chopping your own wood and then nailing it together. However, a wood fence kit can give you that natural look while making the process painless.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How many bags of cement do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
Should you use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
Can fence posts be 10 feet apart?
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
Should a fence be level or follow the ground?
However, a level lot makes fence installation easier, which appeals to DIY novices. To make this decision, consider your land’s degree of slope. If there’s only a slight incline, leveling the lot makes sense. However, if your yard features a more drastic incline, consider working with the land’s natural topography.