Quick Answer: How To Remove Metal Fence Posts?

How do you remove metal fence posts in concrete?

The Rebar Method

  1. Drill a ½-inch wide hole through the post you’d like to remove.
  2. Insert a piece of ⅜-inch rebar through the hole.
  3. Hook a chain around both ends of the rebar.
  4. Attach the chain to a long piece of 4×4 lumber.
  5. Using a cinder block as a fulcrum, pry the post out of the ground using the 4×4 as a lever.

How do you drive metal fence posts into the ground?

The easiest method for driving in ground sleeves and fence posts is to use a post-pounder to create a small hole. As long as the rocks are not solid bedrock, the post-pounder will help push the sleeves into the ground.

Can you reuse metal fence posts?

Whether the fence is over your property line, or maybe the fence was installed badly, you can actually pull chain link fence posts and reuse them. Just be sure to avoid damaging the posts if you try to remove the concrete anchor that holds them in place.

Can you reuse fence posts with concrete?

Pulling up an existing fence post to reuse can be quite a task. Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.

You might be interested:  FAQ: How To Make A Table Saw Fence Guide?

What tool do you need to cut a metal pole?

Cut the pole. If using a circular saw, squeeze the trigger hard and push the saw firmly, evenly and slowly into the pole until it has cut all the way through. With a hacksaw, this will take much longer, as you will be relying on the power of your arms and hands.

How do you remove metal from concrete?

If this doesn’t work, your only recourse short of breaking up the pad is to cut the posts flush with an angle grinder or reciprocating saw that has a metal-cutting blade attached. You may be able to hide the cut posts by grinding the ends to get them below the concrete surface and covering each one with concrete patch.

Leave a Reply

Your email address will not be published. Required fields are marked *