Quick Answer: How Much Does A Split Rail Fence Cost?

How much does vinyl split rail fencing cost?

Depending on the type of wood and the length of the rails, your installed price will be $12-$16 per linear foot from a professional or $8-$12 per foot if you install it yourself. For vinyl split rail fencing, expect to pay $15-$20 per linear foot for the material with the same $4 per linear foot for installation.

How long does a split rail fence last?

So, you can count on your cedar split rail fence lasting at least 15 years, if not longer. Some species can last up to 30 years.

Do split rail fences need concrete?

No, the hole should be filled only with the dirt that came out of the hole and tamped back in. Concrete is bad for the wood (erodes it), and gravel simply creates a porous pocket where water can collect. Well tamped soil is very stable and waterproof. Some people use concrete for gate posts for additional stability.

You might be interested:  Quick Answer: How To Test A Electric Fence?

What is the best wood to use for a split rail fence?

When it comes to the type of wood used to make your wood split rail fence, Western Red Cedar and Yellow Pine are the best options on the market. If you’re going with a wood fence, then these should be your choices in tree species.

Does Lowes sell split rail fencing?

Split rail Wood Fencing at Lowes.com.

How tall are split rail fences?

The two standard fence styles are two-rail, which stand about three feet tall, and three-rail, which stand about four feet tall. rails are commonly available in eight- and ten-feet lengths.

Should you treat a split-rail fence?

Because split-rail fences are often built with untreated wood such as cedar or pine, their constant exposure to the elements may cause them to deteriorate and turn gray over time. Even if your split-rail fence is weathered and worn, it’s not too late to treat it properly and protect it from further weather damage.

How do you maintain a split-rail fence?

Our 7 tips for maintaining your split rail fence include:

  1. Use pressure-treated wood.
  2. Stain the wood regularly.
  3. Keep plants and grass away.
  4. Use Fence Armor.
  5. Choose vinyl for low maintenance.
  6. Do repairs immediately.
  7. Regular inspections reduce common problems.

What fence lasts the longest?

What Type of Fence Lasts the Longest? Chain-link fences with a galvanized finish that doesn’t rust are the longest lasting fences. All other components of the fence are made of steel and are also galvanized, so there is relatively no maintenance.

You might be interested:  Question: How To Fix A Leaning Vinyl Fence Post?

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

How far apart do you put split rail fence posts?

When installing our 8’6” rails, posts should be spaced approximately 8′ on center. Note: To compensate for short rails you may want to divide the shortage by reducing the length of rails on both the first and last sections. If this is not required then we recommend that the short section be in a less conspicuous place.

Do metal fence posts need concrete?

You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.

Is Hemlock good for fence rails?

Ash is an alternative hardwood for fencing, but we do not recommend hemlock, as the wood is unstable and can break or splinter if a horse runs into it. In some areas of the country you will not have the option of using hardwood and will have to use a softwood material.

Leave a Reply

Your email address will not be published. Required fields are marked *