- 1 How far apart do you put T-posts on a barbed wire fence?
- 2 Which side of T post does wire go on?
- 3 Can fence posts be 10 feet apart?
- 4 How many bags of cement do I need for a fence post?
- 5 What is a good distance between fence posts?
- 6 Can I use T posts for corners?
- 7 What is the maximum distance between fence posts?
- 8 What is a fence stretcher?
- 9 Is 2 feet deep enough for fence posts?
- 10 What size Post do you use for a 6 foot fence?
How far apart do you put T-posts on a barbed wire fence?
Use a tape measure to make sure there’s even spacing between the posts. A general guideline for metal fence post spacing is to set them 8-12 feet apart; 10-12 feet is sufficient for a five- to six-strand barbed wire fence.
Which side of T post does wire go on?
Installing T-Posts & Fence The side of the fence that will endure the most pressure should be the side that the post studs face. When the fencing is challenged, the posts will help hold the wire in place, instead of allowing the wire to push away from the supports.
Can fence posts be 10 feet apart?
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
How many bags of cement do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
What is a good distance between fence posts?
Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.
Can I use T posts for corners?
With the proper accessories the T-posts can be used for corner post assemblies. Using T-posts for corners saves time over digging fence-post holes and setting wood posts. Building a fence corner with steel posts falls within the capabilities of any do-it-yourselfer with the skills and tools necessary to build a fence.
What is the maximum distance between fence posts?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
What is a fence stretcher?
Fence stretchers are used to provide the proper amount of tension on wire fences. A tight fence protects livestock and wildlife from getting tangled in the fence which could cause injury or even death. They all work the same with some type of clamp to attach to the wire and a ratcheting system to tighten it.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
What size Post do you use for a 6 foot fence?
The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.