- 1 How far apart do you put fence posts for cattle?
- 2 How far apart should farm fence posts be?
- 3 What is the maximum distance between fence posts?
- 4 Can fence posts be 10 feet apart?
- 5 What type of fencing is best for cattle?
- 6 Is 2 feet deep enough for fence posts?
- 7 Should I use concrete for fence posts?
- 8 How many bags of cement do I need for a fence post?
- 9 What size Post do you use for a 6 foot fence?
- 10 How close to property line can I build a fence?
- 11 Should fence posts be inside or outside?
- 12 How deep should a 4 foot fence post be?
How far apart do you put fence posts for cattle?
In general, T-posts are spaced between 8-12 feet apart, depending on what you’re trying to contain or keep out. Closer spacing is suggested for large livestock, like cattle, while wider spacing is fine for fending off deer and other large pests.
How far apart should farm fence posts be?
Each strand is stretched taut so there is no more than three inches sag between posts. The suspended barbed wires are held apart by twisted wire stays or short pieces of fiberglass posts spaced approximately 10 to 12 feet apart. Line posts are spaced from 50 to 60 feet apart.
What is the maximum distance between fence posts?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
Can fence posts be 10 feet apart?
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
What type of fencing is best for cattle?
Three basic fence types are best suited for cattle: traditional barbed wire, woven wire and high tensile smooth wire, says Ken Edwards, a longtime cattle owner and technical support manager with Red Brand-Keystone Steel & Wire.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Should I use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
How many bags of cement do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
What size Post do you use for a 6 foot fence?
The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.
How close to property line can I build a fence?
Check Rules and Regulations Typically, fences are installed anywhere from 2 to 8 inches from a property line in most areas. Some areas might allow to go right up to a property line, especially if you live in an urban row house where every inch makes a difference!
Should fence posts be inside or outside?
Fence posts should be on the outside of the fence The correct installation of ag fencing is to place it on the inside of the posts. This way, animals in the enclosure brush against the wire, not the posts. Fence posts that have been placed outside of the fence material will take nearly all of the animal’s force.
How deep should a 4 foot fence post be?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).