- 1 How far apart should posts be for a gate?
- 2 How wide should a gate be for a fence?
- 3 What wood should I use for a fence gate?
- 4 What do you put under gate gap?
- 5 How many bags of cement do I need for a fence post?
- 6 Can you make a fence panel into a gate?
- 7 How wide should a double fence gate be?
- 8 Should fence gate open in or out?
- 9 What concrete should I use for fence posts?
- 10 How do I protect a post in the ground?
- 11 What do you use for fence posts?
How far apart should posts be for a gate?
For gates with standard 2×4 framing and 4×4 posts, leave a 1/2- to 3/4-inch space between the latch post and the gate frame. On the hinge side, it will depend on the hardware you use. About 1/4 inch is usually sufficient.
How wide should a gate be for a fence?
We typically recommend that your gate area be no wider than four feet when building a single gate. Anything wider than that and you will need to measure and build a double gate, which meets in the middle.
What wood should I use for a fence gate?
Best Practice Always use best-practice principles for fences and gates, or they won’t last five years. Strength is important because a garden gate moves. As for wood choice, your best bet is a rot-resistant species (cedar, redwood, teak, mahogany).
What do you put under gate gap?
How Can You Fix A Gap Under A Fence Gate?
- Wooden Fences. Adding a small wooden step at the bottom of the fence gate will reduce the gap size and also add more stability to the fence.
- Chain Link.
- Iron Fences.
- Plastic Fencing.
How many bags of cement do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
Can you make a fence panel into a gate?
Rather than building or buying a new gate, you can convert a fence panel to serve as the new gate. Most fence panels easily convert to a gate. If the fence is weak or the panel is not sturdy, you may nail an additional 2-by-4 or 2-by-6 to the back of the panel for additional support.
How wide should a double fence gate be?
On widths of 6′ or more, use a double swing gate. Your front house door is no bigger than 36″ so a minimum of 36″ wide gates should be used. Your appliance will not fit through the gate that you want in the house. A driveway should have 12′ minimum clearance through the gate.
Should fence gate open in or out?
Your gate should always swing inward. You want the gate to move towards private space, not out to the public. Single gate hinges work on either side. If you have a gate swinging on a sloping hill, you might need to place hinges on a different place, like the downhill posts.
What concrete should I use for fence posts?
Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow. Once you’ve finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2×4.
How do I protect a post in the ground?
Set in Gravel and Concrete Gravel allows water to drain quickly away from the post and into the soil. Be sure to place the post in the center of the hole. Finally, fill the entire hole up with cement to the top. Concrete will hold the fence firmly in place and prevent any lateral movement.
What do you use for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.