- 1 How deep do chain link fence posts need to be?
- 2 Can you pound in chain link fence posts?
- 3 How do you secure the bottom of a chain link fence?
- 4 How many bags of cement do I need for a fence post?
- 5 Is 2 feet deep enough for fence posts?
- 6 Does chain link fence decrease property value?
- 7 Is chain link fence the cheapest?
- 8 Should I use concrete for fence posts?
- 9 Should metal fence posts be set in concrete?
- 10 Can pressure treated posts be set in concrete?
- 11 Should chain link fence touch the ground?
- 12 How do you close the gap at the bottom of a chain link fence?
Step 1 – Depending on the geographical location, fence height, and fencing materials used, post hole size may vary. In general for residential chain link fences, dig holes 6″ in diameter by 30″ deep (or below frost line in your area).
Never pound the posts into the ground, especially if you have hard clay or rocky soil, because you’ll bend the tops. The hole should be slightly bigger than the posts, so you can back fill it with dirt packed tightly around the post.
The quickest and easiest way to secure the bottom of your chain link fence is to use a garden border and line the bottom of your fence. Alternatively, you could get tent stakes and secure the bottom of the fence to the ground. Choosing the right option depends on your exact situation and needs.
How many bags of cement do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Chain-link fencing may not raise your property value, but you can purchase fencing materials from Shur-Way Building Center in Vancouver, WA no matter what your fencing needs are! A typical chain link fence isn’t going to do much for your home’s market value.
Even with their separate components – including metal stakes, galvanized posts, brackets and tie wires – chain link fences are almost always cheaper to purchase and install than wood, regardless of the type of lumber in consideration.
Should I use concrete for fence posts?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
Should metal fence posts be set in concrete?
You tend to get a better long-term result by setting the fence posts in concrete as opposed to gravel. When setting fence posts in concrete, it’s best to let the concrete dry for three or four days before attaching your fence rails, panels or pickets.
Can pressure treated posts be set in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. Concrete should be poured around the post – no concrete under the post.
Generally, it is not recommended for a chain-link fence to touch the ground. Ground contact makes the bottom of the fence more vulnerable to corrosion. It can also make yard maintenance more difficult. The fence touching the ground can prevent rodents and other small animals from getting inside for garden areas.
11 ways to fix the gap under a chain link fence
- 1) Use old Tires to fill the gap under a chain link fence.
- 2) Use Cinder blocks or Allan blocks to fill the gap at the bottom of fence.
- 3) Chain Link Fence Stakes.
- 4) You could use tent stakes.
- 5) Use a decorative garden fence in front of the chain link to fill the gap.