How Far Apart Should Fence Posts Be Set?

How far should wood fence posts be apart?

Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

Can fence posts be 10 feet apart?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

You might be interested:  FAQ: How To Build A Sliding Fence Gate?

Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.

What size Post do you use for a 6 foot fence?

The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.

How deep should a 4 foot fence post be?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How many bags of cement do I need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How deep should a 3 foot fence post be?

The general rule is when setting a fence post into the ground, the height required above the ground should be divided by 3 and this figure is the hole depth required. The width of the post hole should be 3 times the width of diameter of the post.

You might be interested:  FAQ: How To Install Dog Fence?

How deep should a 10 foot fence post be?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.

What size post do you use for an 8 foot fence?

A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.

How do you calculate even spacing?

First, multiply the baluster width by the number of balusters to find the total area occupied by the balusters. Next, subtract the baluster area from the total installation width to find the total area occupied by spaces. Finally, divide the total width of the space area by the number of units.

Leave a Reply

Your email address will not be published. Required fields are marked *