FAQ: How To Treat Fence Posts?

How do I keep my fence post from rotting?

How to Protect Wooden Fence Posts From Rotting

  1. Set the wooden fence posts in a cool, dry area with plenty of air circulation so the wood can dry.
  2. Brush the bottom third or bottom half of the fence post with waterborne copper naphthenate, a wood preservative that is free of arsenic and chromium.

How do you keep fence posts from rotting in concrete?

Consider Adding Posts to Concrete From here, you should fill the hole with about 6 inches of gravel. This will prevent rotting by ensuring that the post is kept dry when water makes its way into the soil. Place the post in the gravel, then fill it with a batch of cement until it reaches the top of the hole.

Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.

You might be interested:  Often asked: How To Find A Break In Underground Dog Fence?

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

How long will pressure treated lumber last in the ground?

The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free. But young pressure-treated decks, many less than 10 years old, are being shoveled into landfills.

How long will wooden posts last in concrete?

DuraPost is stronger than both concrete and timber fence posts and is guaranteed to last up to 25 years.

How long do pressure treated fence posts last?

40 ACQ pressure-treated fence post. The normal life expectancy of a pressure treated wood post without a concrete footing can be anywhere from twenty to thirty years.

How deep should a fence post be?

Rule of Thumb Hole depth = put approximately 1/3 of the post in the hole. A 2m (6 foot) post should have up to 600mm (2 foot) in the ground.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

How long does it take for a fence post to set in concrete?

The product will harden initially in 15 minutes. Allow the Rapid Set Concrete to harden for at least 1 hour before removing the bracing supports. It is recommended to wait for 24 hours before affixing anything to the post.

Leave a Reply

Your email address will not be published. Required fields are marked *