FAQ: How To Stretch Woven Wire Fence?

How far apart should fence post be for woven wire?

The most popular woven wire fence design is a 13-48-6 fence with posts spaced every 12 feet. Woven wire fences are often used for both cattle and horses, is popular because it is extremely secure. Animals simply can’t push their way through the woven wire fencing.

Does welded wire fence need to be stretched?

But Not Too Tight It is important to have a level pull uniformly across the height of the fence to avoid distorting the mesh. The amount of tension is determined by the type of mesh. Welded wire fencing material cannot be tightened as much as woven wire meshes, such as field fence, horse fence, deer and wildlife fence.

Can you stretch fence around a corner?

According to Gail Damerow, author of “Fences for Pasture and Garden,” installing a dummy post (a post used for pulling the wire tight) provides an easy way to stretch a woven wire fence. Wrap the horizontal wires on the fence completely around the corner post, and then wrap the wires back on themselves 5 to 3 times.

What is a fence stretcher?

Fence stretchers are used to provide the proper amount of tension on wire fences. A tight fence protects livestock and wildlife from getting tangled in the fence which could cause injury or even death. They all work the same with some type of clamp to attach to the wire and a ratcheting system to tighten it.

You might be interested:  Quick Answer: How To Install Vynal Fence?

How do you tighten a wire?

Twist the end of the wire together with the rest of the strand. Pull the loop around the post and fold it over the strand of wire. Push your bolt through the loop. Use the lever to twist the loop around the strand of wire and continue twisting until the fence is tight.

How do you pull a tight wire?

Loosen wire from the posts where the wire needs tightening. Attach fence tighteners and twist them with a pair of pliers to pull the wire tight again. Reattach the wire to the posts. For new fences, you need to use a fence stretcher tool or a come-along tool to tighten the new wire before you attach it to the posts.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

Can fence posts be 10 feet apart?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

How far apart can you place fence posts?

Use a tape measure to make sure there’s even spacing between the posts. A general guideline for metal fence post spacing is to set them 8-12 feet apart; 10-12 feet is sufficient for a five- to six-strand barbed wire fence.

Leave a Reply

Your email address will not be published. Required fields are marked *