FAQ: How Far Apart Are Chain Link Fence Posts?

How do you space a chain link fence post?

Chain link fence posts are typically spaced a maximum of ten feet apart. For aesthetic reasons, space posts evenly, but do NOT exceed ten feet between posts. If you plan on installing privacy slats or another type of material that will increase wind load, consider using 8′ or 6′ post spacing.

How deep should chain link posts be?

Dig 6-inches to 8-inches for end and corner posts. Dig 4-inches to 6-inches for line posts. Make the holes a third of the length of the pole length plus 4-inches for gravel.

How far apart should gate posts be?

Single walk gates require 3¾” for hinges and latches and double drive gates require 5½”. For example, a 3 foot walk gate should measure 32¼” wide. Adding 3¾” to the width means that the distance between posts (inside face to inside face) should be 36″.

Should chain link fence touch the ground?

Generally, it is not recommended for a chain-link fence to touch the ground. Ground contact makes the bottom of the fence more vulnerable to corrosion. It can also make yard maintenance more difficult. The fence touching the ground can prevent rodents and other small animals from getting inside for garden areas.

You might be interested:  Quick Answer: How Deep Do Fence Posts Need To Be Set?

Do chain link fence posts need to be cemented?

You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.

How do you secure a chain link fence at the bottom?

The quickest and easiest way to secure the bottom of your chain link fence is to use a garden border and line the bottom of your fence. Alternatively, you could get tent stakes and secure the bottom of the fence to the ground. Choosing the right option depends on your exact situation and needs.

How deep should a 8 foot fence post be?

How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

What is the cheapest fence to install?

The Most Affordable Ways to Fence in a Yard

  • Treated pine ($12 to $19 per linear foot installed)
  • Chain link ($10 to $20 per linear foot)
  • Wrought iron ($24 to $32 per linear foot)
  • Barbed wire ($1.50 to $2 per linear foot)
  • Hog wire ($3 to $5 per linear foot)
  • Electric ($1 to $6 per linear foot)
  • Pallet (free!)
You might be interested:  Readers ask: How To Paint A Fence With A Brush?

Can fence posts be 10 feet apart?

Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.

What do you put under gate gap?

How Can You Fix A Gap Under A Fence Gate?

  1. Wooden Fences. Adding a small wooden step at the bottom of the fence gate will reduce the gap size and also add more stability to the fence.
  2. Chain Link.
  3. Iron Fences.
  4. Plastic Fencing.

How many bags of cement do I need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

Leave a Reply

Your email address will not be published. Required fields are marked *